This Altivar 312 3-phase variable speed drive has a rated power of 5.5kW, 15kVA, and a 380V to 500V AC rated output voltage. It is suitable for industrial machines such as materials handling and packaging, packing, textile machines, special machines, pumps and fans. It has a compact form-factor with 180mm width, allowing for a flexible and easy installation on a mounting plate. It also offers a snap-lock seal, status and faults display, a jog dial navigation button and an integrated EMC filter. It offers high readability of key parameters thanks to a bright LED 4-digit display. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime.
Main | |
Range of product | Altivar 312 |
Product or component type | Variable speed drive |
Product destination | Asynchronous motors |
Product specific application | Simple machine |
Assembly style | With heat sink |
Component name | ATV312 |
Motor power kW | 5.5 kW |
Motor power hp | 7.5 hp |
[Us] rated supply voltage | 380...500 V - 15...10 % |
Supply frequency | 50...60 Hz - 5...5 % |
Network number of phases | 3 phases |
Line current | 21.9 A at 380 V, Isc = 22 kA |
EMC filter | Integrated |
Apparent power | 15 kVA |
Maximum transient current | 21.5 A for 60 s |
Power dissipation in W | 232 W at nominal load |
Speed range | 1…50 |
Asynchronous motor control profile | Factory set : constant torque |
Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 |
Supply | Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection |
Communication port protocol | Modbus |
IP degree of protection | IP20 on upper part without cover plate |
Option card | Communication card for CANopen daisy chain |
Complementary | |
Supply voltage limits | 323…550 V |
Prospective line Isc | 22 kA |
Continuous output current | 14.3 A at 4 kHz |
Output frequency | 0…500 Hz |
Nominal switching frequency | 4 kHz |
Switching frequency | 2...16 kHz adjustable |
Transient overtorque | 170…200 % of nominal motor torque |
Braking torque | 150 % during 60 s with braking resistor |
Regulation loop | Frequency PI regulator |
Motor slip compensation | Automatic whatever the load |
Output voltage | <= power supply voltage |
Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m |
Insulation | Electrical between power and control |
Analogue input number | 3 |
Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm |
Sampling duration | AI1, AI2, AI3: 8 ms analog |
Response time | AOV, AOC 8 ms for analog |
Linearity error | +/- 0.2 % for output |
Analogue output number | 1 |
Analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits |
Discrete input logic | Logic input not wired (LI1...LI4), < 13 V (state 1) |
Discrete output number | 2 |
Discrete output type | Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles |
Minimum switching current | R1-R2 10 mA at 5 V DC |
Maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms |
Discrete input number | 6 |
Discrete input type | (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm |
Acceleration and deceleration ramps | Linear adjustable separately from 0.1 to 999.9 s |
Braking to standstill | By DC injection |
Protection type | Input phase breaks: drive |
Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
Local signalling | 1 LED (red) for drive voltage |
Time constant | 5 ms for reference change |
Frequency resolution | Analog input: 0.1...100 Hz |
Connector type | 1 RJ45 for Modbus/CANopen |
Physical interface | RS485 multidrop serial link |
Transmission frame | RTU |
Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen |
Number of addresses | 1…127 for CANopen |
Number of drive | 127 for CANopen |
Marking | CE |
operating position | Vertical +/- 10 degree |
Outer dimension | 442 x 239 x 192 mm |
Height | 232 mm |
Width | 180 mm |
Depth | 172 mm |
Net weight | 6.5 kg |
Environment | |
Dielectric strength | 2410 V DC between earth and power terminals |
Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 |
Standards | IEC 61800-5-1 |
Product certifications | GOST |
Pollution degree | 2 |
Protective treatment | TC |
Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 |
Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
Ambient air temperature for storage | -25…70 °C |
Ambient air temperature for operation | -10…50 °C without derating (with protective cover on top of the drive) |
Operating altitude | <= 1000 m without derating |
Packing Units | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 22.476 cm |
Package 1 Width | 26.31 cm |
Package 1 Length | 29.892 cm |
Package 1 Weight | 6.02 kg |
Unit Type of Package 2 | S04 |
Number of Units in Package 2 | 2 |
Package 2 Height | 30 cm |
Package 2 Width | 40 cm |
Package 2 Length | 60 cm |
Package 2 Weight | 13.171 kg |
Unit Type of Package 3 | PAL |
Number of Units in Package 3 | 18 |
Package 3 Height | 77 cm |
Package 3 Width | 60 cm |
Package 3 Length | 80 cm |
Package 3 Weight | 115.2 kg |
Contractual warranty | |
Warranty | 18 months |
Powered by Froala Editor
